16/40 Assembly
Bosch Rexroth AG
, MIT: PE 2/X, PE 2/H, PE 4, 3 842 564 350/2020-06
7.4 Symbols
used
Table 6: Symbols used
2
1
Connection with T-bolt and fl ange nut.
Make sure the T-bolt is in the correct position when inserting into the
slot and tightening. The notch at the head of the bolt indicates the orientation
of the T-bolt.
1 = T-bolt insertion position in the slot
2 = T-bolt clamping position in the slot
Tightening torque: 25 Nm
SW13
M
D
= 20Nm
Hex wrench
SW = width across fl ats in mm
M
D
= required tightening torque in Nm
SW5
M
D
= 8Nm
Allen keys
SW = size in mm
M
D
= required tightening torque in Nm
M
8Nm
T15
Torx keys
T = Torx no.
M
D
= required tightening torque in Nm
PH3
PZ2
Screwdrivers for cross-head screws
PZ … = Pozidriv screw drive size …
PH … = Phillips screw drive size …
ISO-FLEX
TOPAS
NCA 52
Klüber
Struktovis
GHD
Lubricate/lubricate with specifi c grease lubricant:
• ISO-FLEX TOPAS NCA 52: www.klueber.com
• Klüber Struktovis GHD: www.klueber.com
GHD
V 68
Oil
Oil
Oil
Lubricate/lubricate with specifi c mineral oil:
• GHD: Structovis GHD, www.klueber.com
• V 68: mineral oil with a viscosity of 68
Loctite 243 Loctite 601
Secure the screws with:
• Loctite 243: medium strength (detachable), www.loctite.de
• Loctite 601: high-strength screw retention (non-detachable), www.loctite.de
The marked parts are not required for the described assembly.
Dispose of the parts or use them for other purposes.
2
1
3
Graphical depiction of the installation steps.
The numbers correspond to the sequence of mounting steps, in accordance with
the instructions in the accompanying text.
A
B
C
X
Designation of components in graphics.
The letters denote the components mentioned in the accompanying text.
Detail view from a different direction, for example of the back or the bottom side
of the product.