English |
37
Bosch Power Tools
1 609 92A 1CJ | (10.6.15)
Transport (see figure V)
Before transporting the power tool, the following steps must
be carried out:
– Guide the tool arm downward until the transport safety-
lock
20
can be pushed completely inward.
– Slide the saw-table extensions
15
completely in and lock
them in place (by pushing clamping lever
14
down).
– Adjust a 0° bevel angle and tighten clamping lever
23
.
– Turn saw table
30
rightward to the stop and tighten locking
knob
9
.
– Wind up the mains cable and tie it together with Velcro
strap
63
.
– Remove all accessories that cannot be mounted firmly to
the power tool.
If possible, place unused saw blades in an enclosed con-
tainer for transport.
– Carry the machine by the transport handle
45
or hold it by
the recessed handles
16
on the sides of the saw table.
The power tool should always be carried by two per-
sons in order to avoid back injuries.
When transporting the power tool, use only the trans-
port devices and never use the protective devices.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull the mains
plug.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Cleaning
For safe and proper working, always keep the power tool and
its ventilation slots clean.
The retracting blade guard must always be able to move freely
and retract automatically. Therefore, always keep the area
around the retracting blade guard clean.
Remove dust and chips after each working procedure by
blowing out with compressed air or with a brush.
Clean the roller
38
regularly.
Accessories
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: [email protected]
Article number
Material clamp
1 609 B02 585
Insert plates
1 609 B01 453
Dust bag
1 609 B01 716
Angle adapter for dust bag
1 609 B01 613
Saw blades for wood and plate materials, panels and
strips/mouldings
Saw blade 305 x 30 mm, 40 teeth
2 608 640 440
Saw blades for plastic and non-ferrous metals
Saw blade 305 x 30 mm, 80 teeth
2 608 640 452
Saw blades for all types of laminate flooring
Saw blade 305 x 30 mm, 96 teeth
2 608 642 137
OBJ_BUCH-1600-004.book Page 37 Wednesday, June 10, 2015 11:25 AM
