Bosch 3 600 HC1 A, Original Instructions Manual

Page: 17 / 295

English | 17
Charger AL 1810 CV AL 18V-20 AL 1830 CV AL 1880 CV
Weight according to
EPTA‑Procedure 01:2014 kg 0.17 0.48 0.40 0.60
Protection class / II / II / II / II
Noise/Vibration Information
3 600 HC1 A.. 3 600 HC1 C..
Noise emission values determined according to EN 62841-4-4 .
Typically the A-weighted noise levels of the product are:
– Sound pressure level dB(A) 72 74
– Uncertainty K dB = 2.5 = 2.5
– Sound power level dB(A) 80 82
– Uncertainty K dB = 1.0 = 1.0
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-4-4
– Vibration emission value a
h
m/s
2
< 2.5 < 2.5
– Uncertainty K m/s
2
= 1.5 = 1.5
Mounting and Operation
Action Figure Page
Product features A 286
Delivery scope B 287
Removing the transport safety C 287
Connecting the shaft D 288
Adjusting the handle E 288
Mounting the protection guard F 289
Battery charging and inserting G 290
Switching On and Off H 290
Switching from lawn trimming/
edge cutting I 291
Removing the line spool J 292
Winding line on spool K 292
Mounting the line spool L 293
Line feeding M 293
Maintenance, Cleaning and Stor-
age N 294
Accessories
O
295
Assembly
u
Caution: Switch the garden tool off and pull the mains
plug before performing any maintenance.
Connect shaft (see figures C and D)
Note: A connected shaft can no longer be dismounted.
Remove the transport safety (9) .
Connect the individual parts of the shaft until they can be
heard to engage.
Mounting and adjusting the handle (see figure E)
The handle (1) can be set to different positions. To change
the adjustment, press buttons (7) and move the handle to
the desired position. Release the buttons (7) again so that
the handle can engage.
Mounting the protection guard (see figure F)
Before mounting the protective guard, pull the plant-protec-
tion frame from the delivery position to the storage position.
Position the protection guard
(8) on the trimmer head and
fasten it with the provided screw.
Do not disassemble guard once connected.
Then, pull the plant-protection frame to the working posi-
tion.
Switching on
u
Caution: Switch garden tool off and remove battery
from machine before adjusting or cleaning.
u
The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching on again.
u
Do not briefly switch off and on again several times in
a row.
u
Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
Charging the Battery
The battery is equipped with temperature monitoring that al-
lows charging only in the temperature range between 0 °C
Bosch Power Tools F 016 L94 450 | (10.05.2022)