manualshive.com logo in svg

Bosch 2212, User Manual, Page: 39 / 44

Share
Download
Bosch 2212 User Manual Download Page 39

39

POINT ## FAULTED

[point text]

Indicates the named point is faulted.

POINTS FAULTED

Indicates the system has faulted
points.

POINTS FAULTED

press 

Prompt to press [

] to bypass a

point that became faulted during exit
delay.

PRESS 1 FOR

OWNER TYPE

Prompt to press [1] to assign an
Owner type passcode to a given user.

PRESS 1 FOR

TONE OFF

Prompt to press [1] to turn off the
watch tone feature.

PRESS 2 FOR

USER TYPE

Prompt to press [2] to assign a User
type passcode to a given user.

PRESS 2 FOR

SHORT BEEP

Prompt to press [2] to activate the
watch tone feature. Faulted watch
points causes the keypad to emit a
short beep.

PRESS 3 FOR

ONE-TIME

Prompt to press [3] to assign a One-
Time type passcode to a given user.

PRESS 3 FOR

BEEP TILL KEY

Prompt to press [3] to activate the
watch tone feature. Faulted watch
points causes the keypad to beep
until a key is pressed.

PRESS 4 FOR

DISABLED

Prompt to press [4] to disable a
passcode.

PRESS 4 FOR

BEEP TILL CLOSED

Prompt to press [4] to activate the
watch tone feature. Faulted watch
points causes the keypad to beep
until the point is returned to normal.

PRESS [##]  TO

TURN WATCH
[ON/OFF]

Instructs you to enter the point
number followed by [

] to toggle a

watch point on and off.

PRESS [##]]  TO

BYPASS PT ##

Instructs you to press the point
number followed by [

] to bypass

the point.

Summary of Contents for 2212













































Reviews:

No comments