manualshive.com logo in svg

Bosch 2212, User Manual, Page: 36 / 44

Share
Download
Bosch 2212 User Manual Download Page 36

36

System Displays

Your security system communicates its status and provides instruction
to you through keypad displays. The following list presents all possible
displays along with an explanation for each. Your system might not use
all of them.

ALARM PT ##

[point text]

Indicates a point in alarm, the second
line shows the point’s name.

ALL ON

SYSTEM OK

Indicates the entire system is turned
on and all points are normal.

ALL ON NO DELAY

SYSTEM OK

Indicates the entire system is turned
on with no entry or exit delays.

AUTOBYPASS PT ##

[point text]

Indicates a point has been
automatically bypassed. Call your
alarm company for service.

BATTERY FAILED

TESTING ENDED

Indicates the battery test was
completed unsuccessfully and the test
session is ended.

BATTERY TEST

PASSED

Indicates the battery test was
completed successfully.

CALL FOR SERVICE

Call your alarm company. The
system requires service.

CANCELED PT ##

[point text]

Indicates a cancelled alarm.

CHECK DIAL TONE

Check the phone line for a dial tone.

CODE # IS NOW

DISABLED

Indicates the passcode is disabled.

CODE # IS NOW

ONE-TIME

Indicates the passcode is currently a
One-Time passcode.

CODE # IS NOW

OWNER TYPE

Indicates the passcode is currently an
Owner type passcode.

CODE # IS NOW

USER TYPE

Indicates the passcode is currently a
User type passcode.

CODE # ONE-TIME

Indicates the passcode is an Owner
type.

Summary of Contents for 2212













































Reviews:

No comments