1 609 92A 38B | (24.6.16)
Bosch Power Tools
10
|
Français
When the quick-clamping nut
3
is tightened without the arrow
1
being
within the index mark
2
, the quick-clamping nut
3
can no longer be
manually released. Use a two-pin spanner for releasing the quick-
clamping nut;
do not use a pipe wrench or similar.
Press the spindle lock button
6
to lock the grinder spindle
5
(see
figure B) or hold the grinder spindle
5
in place using a suitable span-
ner (see figure C). To tighten the quick-clamping nut
3
, turn the grind-
ing disc firmly in clockwise direction.
A properly fastened, undamaged quick-clamping nut can be manually
loosened by turning the knurled ring in anticlockwise direction.
Never loosen a tight quick-clamping nut using pliers; always use
the two-pin spanner.
Apply the two-pin spanner as shown in the fig-
ure – see figure D.
Subject to change without notice.
Ecrou de serrage rapide
Impérativement observer les consignes de sécurité relatives à
l’outil électroportatif utilisé.
OBJ_BUCH-1537-003.book Page 10 Friday, June 24, 2016 9:11 AM
