Bosch 06039B6104, Original Instructions Manual

Page: 13 / 199

English | 13
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.
There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for tightening and loosening
screws, as well as for drilling in wood, metal and plastic and
for impact drilling in brick, concrete and stone.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless chuck
(2) Operating mode setting ring
(3) Operating mode indicator
(4) Rotational direction indicator for clockwise rotation
(drilling and driving in screws)
(5) Rotational direction indicator for anti-clockwise rota-
tion (unscrewing screws)
(6)
Battery charge indicator
(7) Electronic rotational direction switch
(8) Handle (insulated gripping surface)
(9) Battery release button
(10) Battery
a)
(11) On/off switch
(12) Worklight
(13) Universal bit holder
a)
(14) Screwdriver bit
a)
(15) Drill bit
a)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Impact drill EasyImpact 12
Article number 3 603 JB6 1..
Rated voltage V 12
No-load speed
A)
– First gear min
-1
0–400
– Second gear min
-1
0–1300
Impact drill EasyImpact 12
Impact rate at no-load
speed
A)
min
-1
19500
Max. torque, hard/soft screw-
driving application according
to ISO 5393
A)
Nm 15/30
Torque settings 12 (11+Max)
Tightening torque range Nm Min. 0.7 – max. 2.8
Max. drilling diameter (1st/2nd gear)
– Steel mm 8
– Wood mm 20
– Brick/limestone mm 6
Max. screw diameter mm 6
Max. drill chuck clamping
width mm 10
Weight according to
EPTA-Procedure 01:2014
B)
kg 1.0
Recommended ambient tem-
perature during charging °C 0 to +35
Permitted ambient temperat-
ure during operation
C)
and
during storage
°C –20 to +50
Recommended rechargeable
batteries PBA 12V...
Recommended chargers GAL 12...
A) Measured at 20–25 °C with rechargeable battery PBA 12V
2.5Ah .
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to
EN 62841-2-1 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
85 dB(A); sound power level
96 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 62841-2-1 :
Drilling into metal: a
h
<2.5 m/s
2
, K = 1.5 m/s
2
,
Impact drilling into concrete: a
h
= 19 m/s
2
, K = 1.5 m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
Bosch Power Tools 1 609 92A 6UG | (14.07.2021)