Bosch 06008B0203, Original Instructions Manual

Page: 21 / 299

English | 21
Robotic Lawnmower SI
Unit
Indego S 500 Indego S+ 500 Indego M 700 Indego M+ 700
Switzerland F 016 L90 934 F 016 L90 934 F 016 L90 934 F 016 L90 934
United Kingdom F 016 L90 935 F 016 L90 935 F 016 L90 935 F 016 L90 935
Rest of Europe F 016 L90 916 F 016 L90 916 F 016 L90 916 F 016 L90 916
Input voltage (AC) V 220-240 220-240 220-240 220-240
Protection class
/ II / II / II / II
Frequency Hz 50-60 50-60 50-60 50-60
Output voltage (DC) V 24 24 24 24
Protection type IPX7 IPX7 IPX7 IPX7
Weight kg 1.25 1.25 1.25 1.25
A) Depends on cutting height, grass conditions and moisture
B) Internal battery temperature
Noise/Vibration Information
Noise emission values determined according to
EN 50636-2-107 .
Typically the A-weighted noise levels of the product are:
Sound power level
59 dB(A).
Explanation of Figures
Action Figure Page
Accessories A 282
Delivery scope/unpacking the mower B 283
Laying out perimeter wire C 283
Extending perimeter wire D 284
Laying perimeter wire around new in-
ner object E 284
Lifting up and carrying the mower
F
285
Setting the height of cut G 285
SpotMow H 286
Cleaning I 286
Maintenance J 287
Adding a further lawn area
– with additional docking station
(right)
– without additional docking station
(top left)
K 287
Replacing the battery L 288
Software update M 289−290
Power supply unit connection N 291
Installation
With the following QR code, you can view a video on how to
install the mower under www.bosch-diy.com/indego-help.
Alternatively, follow the Installation Guide delivered with the
product.
Check if the perimeter wire is fully pegged to
the ground avoiding any slack lengths of wire.
Any loose wire can be a trip hazard.
Remove stones, loose pieces of wood, wire, live mains
cables and other foreign objects from the cutting area.
Make sure that the cutting area is even and has no ditches,
grooves and steep slopes above 15°/27 % that are clear ob-
structions for the mower.
The docking station must be positioned on the wire at an
outer edge of the cutting area. It may not be positioned on
the side of a tool or garden shed standing as an island within
the lawn to be mowed.
It is recommended that you mow your lawn once with a con-
ventional lawnmower before installing and before the first
mowing of the new season and whenever the grass clippings
would be longer than 5 mm.
The mower's cutting system is designed to cut small lengths
of grass (30–50 mm). The clippings can remain as mulch to
fertilize the lawn. The height of cut for mower can be adjus-
ted to 30, 40 and 50 mm.
It is recommended to start with a higher setting and then
gradually decrease the height of cut as the wire disappears
under the grass. This prevents your Indego from cutting the
wire.
Additional perimeter wire can be added using a wire con-
nector (see figures
D – E ).
The perimeter wire can be extended up to a maximum length
of
350 m.
The perimeter wire can be buried up to 5 cm under the
ground (or under non-metallic slabs).
To avoid causing damage to the perimeter wire, do not verti-
cut or rake the area where it is positioned.
Bosch Power Tools F 016 L94 038 | (06.10.2022)