Bosch 0 601 B43 0K0, Original Instructions Manual

Page: 36 / 581

36 | English
Symbols and their meaning
Wear a dust mask.
Wear safety goggles.
Wear hearing protection! Exposure to
noise can cause hearing loss.
Danger area! Keep hands, fingers and
arms away from this area.
Keep your fingers away from the mov-
ing parts of the glide arm.
There is a risk
of fingers being crushed and severely in-
jured.
Ø
30
mm
Ø
305 mm
Take note of the dimensions of the saw
blade. The hole diameter must fit the tool
spindle without play. If it is necessary to
use reducers, ensure that the dimensions
of the reducer are suitable for the base
blade thickness and the saw blade hole
diameter, as well as the tool spindle dia-
meter. Wherever possible, use the redu-
cers provided with the saw blade.
The saw blade diameter must match the
information specified on the symbol.
When transporting the power tool, hold it
only at the locations indicated (recessed
handles) or by the transport handle.
Never carry the power tool using the
handle of the glide arm.
For bevel angles, you need to adjust the
left/right fence extension or completely
remove it.
In combination with the ProCORE-18V
rechargeable batteries, the new high-per-
formance motor offers a comparable per-
formance to that of the motors of corded
power tools.
Symbols and their meaning
Clamping handle open:
Bevel angles can be adjusted.
Clamping handle closed:
The set bevel angle of the glide arm is
locked.
Indicates the individual steps for adjust-
ing the bevel angle.
1. Loosen the clamping handle
2. Swivel the glide arm slightly to the left
3. Set the required bevel angle range us-
ing the rotary knob
Setting the bevel angle ranges using the
rotary knob:
Saw blade inclination to the left (45° to
0°)
Saw blade inclination to the right (0° to
45°)
Entire swivel range of the glide arm (-47°
to +47°)
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
47° (to the left) to 47° (to the right).
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
With the
Bluetooth
®
Low Energy Module GCY 42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of
Bluetooth
®
wire-
less technology.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle
1 609 92A 5HG | (08.04.2020) Bosch Power Tools