18
| English
2 609 140 769 | (8.7.10)
Bosch Power Tools
f
Do not treat the surface to be worked with
solvent-containing fluids.
Materials being
warmed up by the scraping can cause toxic
vapours to develop.
f
Exercise extreme caution when handling
the scraper.
The accessory is very sharp;
danger of injury.
f
Products sold in GB only
: Your product is
fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the
original plug.
The severed plug must be disposed of to
avoid a possible shock hazard and should
never be inserted into a mains socket else-
where.
Products sold in AUS and NZ only
: Use a
residual current device (RCD) with a rated
residual current of 30 mA or less.
Functional Description
Read all safety warnings and all
instructions.
Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for sawing and cutting
wooden materials, plastic, gypsum, non-ferrous
metals and fastening elements (e.g., unhardened
nails, staples). It is also suitable for working soft
wall tiles, as well as for dry sanding and scraping
of small surfaces. It is especially suitable for
working close to edges and for flush cutting.
Operate the power tool exclusively with Bosch
accessories.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1
On/Off switch
2
Thumbwheel for orbit frequency preselec-
tion
3
Venting slots
4
Tool holder
5
Handle (insulated gripping surface)
6
Plunge saw blade*
7
Clamping bolt with spring washer
8
Allen key
9
Adapter for tool holder
10
Sanding plate*
11
Sanding sheet*
12
Felt ring of the dust extraction*
13
Retaining clip of the dust extraction*
14
Vacuum connection*
15
Dust extraction*
16
Vacuum hose*
17
Extraction adapter*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
OBJ_BUCH-1271-001.book Page 18 Thursday, July 8, 2010 10:58 AM
