Display configuration
42
8.2.5
Conditional formatting
This function pigments the displayed values in dependence of a specified measurement channel
value.
Example: The text color changes from white to red when the battery voltage is fewer than 12 V.
Conditional Formatting is available at numeric, ‘Bargraph’ and ‘Alarm’ display element.
1.
Double-click on the display element.
The Numeric Wizard window opens.
2.
Switch to the tab ‘Conditional Formatting’.
The lower and the upper limits are configured in the same way.
a)
Check the box to activate the formatting at a lower limit.
b)
Enter the limit value when the formatting is active.
c)
Enter the limit value when the reset hysteresis function is active. The reset hysteresis function
avoids the high-frequent switchover of the measurement channel value.
d)
Choose the borderstyle, background and foreground color of the numeric display element.
e)
Click the Extended button to show further options to change the color of the title, border and
text individually. If a ‘Bargraph’ display element is used, its colors can also be changed.
3.
Click ‘OK’ when done.
a)
b)
c)
d)
e)
Summary of Contents for DDU 7
Page 1: ...Bosch Motorsport Display DDU 7 Manual F 02U 003 052 01 ...
Page 2: ......
Page 13: ...6 Mechanical drawing ...