If you do not want the coffee maker to start operation
immediately, for example now it is 8:10, you hope that the
coffee maker will automatically start working at 13:00 ,
first follow steps 1 to 5 of above section, and then you
can set the auto-start function as follows:
1. Set the current time by pressing “Hour” and “Min”
button repetitively, that is 8:10.
NOTE: The time cycle is 24 hours.
2. Press “Prog” button once and the “Program indicator”
blinks in white.
3. Set the auto-start time by pressing “Hour” and “Min”
button repetitively that is 13:00.
4. Press the “Prog” button again, the “Program indicator”
illuminates in white solidly. After a while, the display will
indicate the current clock.
NOTE: You may cancel the auto-start function by press-
ing “Prog” button again. If you want to change the
auto-start time, only following the above 2-4 steps again.
5. When the time is due, the On/Off indicator will
illuminate in red and the appliance starts brewing.
6. When the process is finished, if you do not want to
serve immediately, keep the coffee maker be energized,
and the coffee can be kept warm on the warming plate.
And the appliance will shut off automatically after 2 hours
from the On/Off button being activated if it has not been
manually disconnected at the completion of brewing. For
an optimum coffee taste, serve it just after brewing.
NOTE: During brewing process, the buttons of “Prog”
,“Hour” and “Min” are invalid.
CAUTION: Be sure to unplug this appliance before
cleaning. To protect against electrical shock, do not
immerse cord, plug or unit in water or liquid. After each
use, always make sure plug is first removed from wall
outlet.
1. Clean all detachable parts after each use in hot sudsy
water.
2. Wipe the exterior surface of unit with a soft, damp
cloth to remove stains.
3. Water droplets may buildup in the funnel and drip
onto the product base during brewing. To control the
dripping, wipe off the area with a clean, dry cloth after
each use.
4. Use a damp cloth to gently wipe the warming plate.
Never use abrasive cleaner to clean it.
5. Replace all parts and keep for next use.
CLEANING AND MAINTENANCE
DELAY FUNCTION
