Borum CH30T, Owner'S Manual

Page: 10 / 13

10/19 CH30T
Made in China to TQB Brands Pty Ltd specifications P a g e | 9
Visit us at www.tqbbrands.com.au
8. SERVICE & REPAIR
Any Borum Industrial Drill Press found damaged in any way, or found to be worn or operates
abnormally should be removed from service until repaired by an authorised service agent. Owners
and / or operators should be aware that repair of this product may require specialised equipment
and knowledge. Only authorised parts, labels, decals shall be used on this equipment. Annual
inspection of the drill press is recommended and can be made by an authorised repair facility to
ensure that your equipment is in optimum condition and that the equipment has the correct decals
and safety labels specified by the manufacturer.
PARTS LIST
Part Description QTY Part Description QTY Part Description QTY
1 Base 1 42 Ring, retaining 1 82 Pin 1
2 Spring washer 3 43 Screw 1 84 Zero mark 1
3 Bolt, hex 3 44 Lever ADJ 1 85 Nut 1
4 Crank 1 45 Pin 1 86 Ball bearing 1
5 Handle, sleeve 1 46 Spring washer 4 87 Quill gasket 1
6 Bolt handle 1 47 Screw 4 88 Handle 1
7 Rack 1 48 Fixed rod 1 89 Adj height worm drive 1
8 Screw 1 49 V-Belt 1 90 Helical gearing 1
9 Pin gear 1 50 Pulley lower 1 93 Tilt gauge 1
11 Table bracket 1 51 Pulley mid – shaft 1 94 Quill 1
12 Scale depth 1 52 Ball bearing 2 95 Thrust bearing 1
13 Rivet 4 53 Pulley middle 1 96 Bell bearing 1
14 Column lower 1 54 Retaining ring 1 97 Flange 1
15 Pinion shaft 1 55 Knob 1 98 Screw 2
16 Screw wingnut 1 57 Spindle speed label 1 99 Hose adaptor 1
17 Bush pinion shaft 1 58 Pulley case upper 1 100 Stud arm mounting 2
18 Key 1 59 Nut 1 101 Washer 2
19 Head pinion shaft 1 60 Spindle pulley 1 102 Nut 2
20 Feeding handle 3 61 V-Belt 1 103 Table 1
21 Knob 3 62 Release spring 5 104 Zero mark 1
23 Rack collar 1 63 Screw 5 105 Chuck 1
24 Rod 1 64 Screw 5 106 Arbor 1
25 Screw 2 65 Cord clamp 5 107 Chuck key 1
26 Screw 2 66 Screw 5 108 Spindle 1
27 Support bracket 1 67 Switch plate 1 109 Retaining ring 2
28 Shaft lever 1 68 Switch 1 110 Ball bearing 2
29 Screw hex head 4 69 Cord 1 111 Bearing spacer 1
31 Motor 1 70 Nut 2 113 Pulley insert 1
32 Label 1 71 Spring 1
33 Nut, hex 4 72 Spring 1
34 Screw 1 73 Nut 1
35 Pulley 1 74 Screw 1
36 Nut, hex 2 75 Rivet 4
37 Spring washer 2 76 Label 1
38 Motor fastening
plate 1 79 Socket 1
39 Support bracket 1 80 Warning label 1
40 Power cord 1 81 Head 1