10/19
BNTR20PN
Made in china to TQB Brands Pty Ltd specifications
P a g e
|
4
Visit us at www.tqbbrands.com.au
Lowering Vehicle
WARNING: Ensure all tools and personnel are clear from the area before lowering
the vehicle.
1.
Get into the vehicle
2.
Another person, standing clear from vehicle path should observe and guide the vehicle operator.
3.
Unsecure chock from the wheels on the ground.
4.
Place the vehicle in gear. Release brakes; move vehicle off ramps.
5.
Proceed slowly and cautiously, never apply brakes suddenly.
6.
After lowering the vehicle, pull the ram handle up to manoeuver the truck ramps to a safe place
of storage.
4.
INSPECTION
Prior to each use conduct a visual inspection checking for abnormal conditions, such as cracked
welds, leaks, and damaged, loose, or missing parts.
1.
The ramps shall be maintained in accordance with the maintenance instructions (Section 6). No
alterations or modifications shall be made to these Ramps.
2.
Inspections shall be performed in accordance with this owner’s manual.
3.
The ramps must be inspected immediately if it is believed to have been subjected to abnormal
load or shock.
5.
STORAGE
These ramps should always be stored in a dry location on a level surface with the lifting arm in the
fully lowered position.
6.
MAINTENANCE
Monthly maintenance is recommended.
The following steps are designed to keep the ramps well maintained and operational.
1.
The ramps must be inspected immediately if it is believed to have been subjected to abnormal
load or shock.
2.
Any ramp found to be damaged, worn or operates abnormally must be removed from service until
repaired by an authorised service representative.
3.
Regularly clean all surfaces and maintain all labels and warnings.
4.
Always store your ramps in the fully lowered position. This will help protect critical areas from
corrosion.
7.
SERVICE & REPAIR
Any Truck Ramps found damaged in any way, or found to be worn or operates abnormally should
be removed from service until repaired by an authorised service agent. Owners and / or operators
should be aware that repair of this product may require specialised equipment and knowledge.
Only authorised parts, labels, decals shall be used on this equipment. Annual inspection of the Jack
Stands is recommended and can be made by an authorised repair facility to ensure that your
equipment is in optimum condition and that the equipment has the correct decals and safety labels
specified by the manufacturer.
