Bort 93416121, Manual

Page: 9 / 36

9
ENGLISH GB
HIGH PRESSURE CLEANER
INTRODUCTION
The high pressure cleaner is quick and efficient for clean-
ing vehicles, machines, boats, buildings, etc ., by the re-
moval of stubborn dirt using clean water and chemical
detergents .
When using chemical detergents, only use biodegradable
types . Only clean vehicle engines in areas in which suita-
ble oil traps are installed .
TECHNICAL SPECIFICATIONS (FIG. 1)
Power consumption 2 500 W
Max pressure 180 bar
Working pressure 140 bar
Maximum output
8 l/min /
480 l/min
Auto-sucking function +
Automatic blocking +
Hose 8 m
Power cord length 5 m
Voltage / Current
frequency
220 V / 50 Hz
Product weight 8,9 kg
PRODUCT ELEMENTS (FIG. 2)
1 . High pressure hose;
2 . High pressure hose holder;
3 . A spear;
4 . Wheel;
5 . Lever;
6 . OFF/ON switch;
7 . Power cable;
8 . water intake;
9 . Quick-release nozzle;
10 . Quick-release nozzle;
11 . Power cord hook;
12 . High pressure hose;
13 . High pressure outlet;
14 . Quick-release nozzle;
15 . Quick-release nozzle;
16 . High pressure hose reel .
THE COMPLETE SET INCLUDES:
• Adjustable spray nozzle;
• Pressure hose;
• Filter;
• Quick nozzles;
• Foam generator;
• Nozzle cleaning pin;
• Quick connector .
Product Life:
The service life of the product is 5 years .
Production date:
Is indicated on the packaging of the goods .
Shelf life:
Shelf life is not limited (subject to storage conditions) .
Storage conditions:
Products are stored in dry, ventilated warehouses at tem-
peratures from 0 ° C to +40 ° C with a relative humidity of
not more than 80% .
Transportation:
It is strongly prohibited dropping and any mechanical im-
pact on the packaging during transportation .
When unloading / loading, it is not allowed to use any
type of equipment that works on the principle of packing
clamping .
SAFETY INSTRUCTIONS
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk
of fire, electric shock and personal injury . Read the fol-
lowing safety instructions and also the enclosed safety
instructions .
Keep these instructions in a safe place!
Electrical safety
Always check if your mains voltage corresponds with the
value on the type plate .
When replacing old cables or plugs: throw away old
cables or plugs immediately as soon as new ones have
replaced these . It is dangerous to put the plug of a loose
cable into the socket outlet .
When using extension cables:
Only use an approved extension cable that is suitable for
the machine’s power . The cores must have a diameter of
at least 1 .5 mm2 . When the extension cable is on a reel,
unroll the cable in its entirety .
All electrical connections e .g . extension cable, must be of
an approved waterproof type for outdoor use and marked
accordingly . Extension cables must be threecore, one of
which is EARTH .
Switch off the machine immediately in case of:
17 . Malfunction in the mains plug, power cable or damag-
ing of cable .