14
10 FEET PRO-SERIES ASSEMBLY
SECTION #4
FOR STEPS 1&2, HARDWARE NEED ONLY BE FINGERTIGHTENED
TOOLS REQUIRED:
PHILLIPS HEAD SCREWDRIVER, ADJ WRENCH, FLAT HEAD SCREWDRIVER, CORDLESS
DRIVER WITH PHILLIPS ATTACHMENT, TAPE MEASURE
*REMOVE ALL ITEMS FROM CARTON AND CHECK AGAINST THE FOLLOWING LIST:
*PARTS LIST – 10FT W/CENTER SHELF UNIT*
ITEM
DESCRIPTION
REQ’D
1
CENTER DOOR
1
2
CENTER BASE SHELF 1
3
BACK STOP CHNL
1
4
24” FRONT FACE BRKT
1
*REMOVE ALL ITEMS FROM THE HARDWARE PACK AND CHECK AGAINST THE FOLLOWING LIST:
ITEM 5 ITEM 6 ITEM 7
ITEM 8
¼ FLAT WASHER ¼-20 KEPS NUT ¼-20X5/8 GD5 HX HD SCREW ¼-20 x ¾ Hes Head SFS
(8) REQ’D
(4) REQ’D
(4) REQ’D
(4) REQ’D
ITEM 9 ITEM 10 ITEM 11
#14 x ¾ Hex Head SDS
¼ TURN SPRING LOADED ¼ TURN RETAINER
(1) REQ’D (2) R EQ’D
(2) REQ’D
STEP 1:
HANG BENCHES ON UNI-STRUT
Once both benches are hanging on the uni-strut slide the two together until the tops touch. NOTE: IF YOU DO NOT HAVE
A CENTER BASE SHELF THEN GO TO STEP 3. Bolt the center base shelf (Item 2) into position using (4) ¼-20 x 5/8 hx
hd screw (Item 7), (8) ¼ flat washer (Item 5), & (4) ¼-20 keps nuts (Item 6). DO NOT TIGHTEN.
Summary of Contents for BASIC PRO SERIES
Page 17: ...17 ...
