28
C. RUPS II for Novell Netware (Optional)
1. Login the File Server as a SUPERVISOR or a USER with Access Right in
sub-directory SYS:SYSTEM. F:\>LOGIN SUPERVISOR
2. Insert the system diskette into the floppy disk Driver A (or your PC
designated drive).
3. Execute INSTALL.EXE in Driver A.
F:\>A:
A:\>INSTALL
4. After the installation is complete, please shutdown your NetWare
Operating System and re-start it. The system will load the PowerMan.NLM
and execute it.
5. When the RUPS II for NetWare Is loaded, the Filer Server will broadcast a
successful loading message on the screen. You may switch to the RUPS II
Menu by pressing ALT_ESC simultaneously.
7.2.2. UPSilon 2000 Installation
A. UPSilon 2000 for Windows 95, 98, 2000, NT, XP
1. From the Start Button, choose "Run".
2. Type
D:\Windows\Setup.exe
3. Choose
OK.
B. UPSilon 2000 for Novell Netware V3.1x
1. Login the File Server(with access rights in SYS: SYSTEM)
2. Execute
D:\Netware\V3.1x\Install.exe
3. Re-boot
System.
C. UPSilon 2000 for Novell Netware V4.x
1. Login the File Server(with access rights in SYS: SYSTEM)
2. Execute
D:\Netware\V4.x\Install.exe
3. Re-boot
System
D. UPSilon 2000 for Novell Netware V5.x
1. Login the File Server(with access rights in SYS: SYSTEM)
2. Execute
D:\Netware\V5.x\Install.exe
29
3. Re-boot
System
E. UPSilon 2000 for FreeBSD and Linux
1. Log in as a super-user.
2. Use the 'ftp' utility in MS-DOS to copy files into the system directory '/tmp'.
3. Follow the instructions below to make the filename conversion after the
'ftp'
File transfer:
#cd/tmp
#mv linux.z linux.Z, or
#mv LINUX.Z linux.Z
#chmod 755 install
4. Execute the installation program:
#./install
5. Select a target system from the menu, and configure the UPSilon for
Unix(Make sure no other process using the same serial port), the
installation Program will launch the UPSilon for Unix daemon process
automatically.
www.upsdirect.com