boRn 125KHz Curved-Bar Reader Operation Manual Version 1.0
Model
：
BN-HS168
General
This is a 125KHz flash reader. When a 125KHz card is being read by the reader, the reader will lit up.
Reader Start up
When reader power up, the reader will lit ON. The Blue LED will maintain ON to show the power is ON. The
reader will ‘beep’ to indicate the start up procedures is finished.
Installation Diagram
1.
The back part shall fit on the wall.
2.
The cover shall clip on the upper edge of the back part first.
3.
After, tighten the screw goes underneath of the reader to fix the reader with the back part.
4.
Propose to contact with 22AWG Shielding wire
Operating Specification:
Operating Voltage
9 ~ 13VDC
Typical read range
5cm
Operating current
130mA
Standard Color
Black
Operating Temperature
-20°C ~ 60°C
Exterior dimension
150mm × 53mm × 25mm
