BorMann PRO BEW8600, Owner'S Manual

Page: 3 / 8

EN
WWW.BORMANNTOOLS.COM
3
Additional safety instructions
Use clamps or other method to secure and support the workplace to a stable platform. Holding the work by hand or against your body is unstable and may
lead to loss of control.
Do not force tool. Use the correct tool for your application. The correct tools will do the job better and safer at the rate for which it is designed.
Please choose the right sockets according to the size of the bolt and nut. You also must choose the right sockets suit for the size of the square drive. If you use
wrong sockets will result in inaccurate torque and damaging the bolt and tool. The specification of bolt,nut and required torque must accord with the precision
class of the bolt, nut and national standard.
Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments,changing accessories,or storing the tool. Such preventive safety measures reduce
the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
Maintain tools with care. Keep tools in a good condition and make sure they are clean. Properly maintained tools are less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories recommended by the manufacturer for your model. Accessories that are suitable for one tools, may cause accidents when used with
another tool.
Warning:
Please stop the tool when you want to change the running direction and change by pressing the switch.
Please rest the tool for 5 minutes after the cycle of 5 minutes.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without
prior notice unless these changes significantly affect the performance and safety of the products. The parts described
/ illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufac-
turer's product line with similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent
purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or re-
placement work, including maintenance and special adjustments, must only be carried out by technicians of the
authorized service department of the manufacturer.
Voltage/frequency: 230-240V/50Hz
Power: 1010W
No-load speed: 2200Rpm
Max. Torque: 450Nm
Size of spindle: 1/2"
Sockets*: 17/19/21/22mm
Technical Data
Tools can be used for tire changing, shock absorber replacement,exhaust system work,lawn mower repair and small engine work,assembling and disassembling
the bolt and nut.
Scope of use
Operating instructions
Switching ON/OFF
The wrench is equipped with a toggle switch to switch the direction of rotation quickly from clockwise to an-
ti-clockwise for removing nuts and bolts.
Press the lower part of the switch to engage clockwise rotation or the upper part to engage anticlockwise rotation.
Attaching/Removing sockets or accessories
To install a socket on the anvil, align the hole of the socket with the anvil and push down firmly.
To remove a socket from the anvil, pull the socket out firmly.
Clockwise
Anti-clockwise
Anvil
*Not included with all models