BorMann BRT1200, Manual

Page: 9 / 10

www.BormannTools.com
Ⅱ
. Technical data
Voltage/Frequency: 230V/50Hz
Input power: 1200W
Adjustable speed: 11500-34000rpm
Chuck diameter: 8mm and 6mm
Ⅲ
. Precautionary measures:
- The checks can only hold tools
Φ
8 mm and
Φ
6 mm at a speed of 22000 rpm.
- Only use the origin chucks
- Check the condition of the circular cutter block
- Periodically control efficient operation of the switch.
- Before plugging in the mains, make sure the tool is in upper position. Never bring
fingers near the circular cutter block when in operation.
- Always place the dust collector and protector and check the attachment (never
dismantle the collector when in operation). Connect the dust collector to a vacuum
device.
- Tooled materials may contain harmful components (example: processed wood).
In that case or in case of doubt, the wearing of individual respiratory protection
equipment (example: mask) is advised for the operator and any people present in
the work area. Children and pregnant women should not be in the work area. See
to an efficient recuperation of dust and wastes; and get informed with the
competent services for their elimination.
Ⅳ
. Assembly:
ALWAYS unplug from the mains when assembling
-
Mounting or replacing the circular cutter block Block the shaft with button ,
loosen the nut with the spanner and place or change the circular cutter block by
inserting at least 2/3 of the circular cutter block
’
s shank in the chuck. Relock the
unit.
- Loosen the locking lever every time after using let the head of the tool go back to
the upper position
Ⅴ
. User instructions
1) The tool
’
s operation:
The ruler allows locating the position of the circular cutter block. Adjust the desired
depth by placing the bumper on one of the bumps on the barrel and lock the lever to
Wearing of protection goggles advised
Wearing of protection gloves advised
Wearing of sound protection advised