BorMann BPW1500, Owner'S Manual

Page: 16 / 22

www.BormannTools.com
Step 3
Attach the high pressure hose (G) to the pressure cleaner water outlet. Insert and quick-connect it tight
to avoid leakage. When the pieces are joined properly, you cannot separate the two components by
pulling straight out from the water outlet. Push the “Button” according to the direction of arrow, then you
can pull out the high pressure hose.(see Fig.1)
Fig.1 Fig.2
Step 4
Attach the hose connector to pressure washer.
Before attaching the connector to the male fitting,
remove the plastic cap, which is inserted onto the
male fitting on the pressure washer before shipping.
This plastic cap can be discarded once removed.
After both components have been installed, attach
the garden hose with connector screw on the
pressure washer. Connect the garden hose to the
waterspout.