background image

13

 

www.BormannTools.com 

7. Stay alert – always be aware of where you are directing the high pressure spray

8. Keep cleaning area clear of all people.

9. Keep good footing and balance at all times – do not overreach or stand on an unstable

support.

10. The work area should have adequate drainage to reduce the possibility of a fall due to

slippery surfaces.

11. Follow the maintenance instructions specified in the manual.

12. To reduce the risk of electrocution, keep all connections dry and off the ground. Do not

touch plug with wet hands.

GENERAL SAFETY PRECAUTIONS 

1. Intended for outdoor household use only.

2. High-pressure hose can develop leaks from wear, abuse, kinking etc. Do not use a

damaged hose.

3. Do not use the pressure cleaner in areas near combustible materials, combustible fumes, or

dust.

4. Some chemicals or detergents may be harmful if inhaled or ingested causing severe injury.

Use a respirator or mask whenever there is a chance that vapors may be inhaled.  Read all

instructions included with the mask so you are certain the mask will provide the necessary

protection against inhaling harmful vapors.

5. Before starting the pressure cleaner in cold weather, check all of the parts of the equipment

and be sure that ice has not formed.  Do not store the unit anywhere that the temperature

will fall below 0

 (32

).

6. DO NOT MAKE ANY MODIFICATIONS TO ANY OF THE COMPONENTS! Units with

broken or missing parts, or without the protective housing or covers should NEVER be

operated

7. Keep the high-pressure hose connected to the pressure cleaner and the spray gun while the

system is pressurized. Disconnecting the hose while the unit is pressurized is dangerous,

and may cause injury.

8. Do not leave the pressure cleaner unattended while the power switch is ON.

9. Keep water spray away from electrical wiring or fatal electric shock may result.

Summary of Contents for BPW1500























Reviews: