6
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help.
Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the
safety of the power tool is maintained.
4. Specific Safety Warnings
· Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance.
Contact
with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage.
· Switch off the power tool immediately when
the tool is in insert jams. Be prepared for high
reaction torque that can cause kickback.
The
tool insert jams when:
-the power tool is subject to overload or -it
becomes wedged in the workpiece
· Hold the power tool with a firm grip.
High
reaction torque can briefly occur while driving in
and loosening screws.
· Secure the workplace.
A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
· Keep your workpiece clean. Blends of
materials are particularly dangerous. Dust
from light alloys can burn or explode.
· Always wait until the power tool has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
·
Avoid unintentional switching on. Ensure
the On/Off switch is in the off position before
inserting battery pack. Carrying the power tool
with your finger on the On/Off switch or inserting
the battery pack into power tools that have the
switch in accidents.
·
Do not open the battery. Danger of short-
circuiting.
· Protect the battery against heat, e.g., also
against continuous sun irradiation and fire.
There is danger of explosion.
· In case of damage and improper use of the
battery, vapors may be emitted. Provide
for fresh air and seek medical help in case
of complaints.
The vapors can irritate the
respiratory system.
· When the battery is defective, liquid can
escape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
