EN
WWW.BORMANNTOOLS.COM
6
Cleaning the kitchen
Range hoods, microwave ovens and surroundings, gas stoves, refrigerators, ventilators, stoves, floors, walls, etc.
Caveat
When cleaning electrical products, be sure to unplug the power cord.
The following 3 methods are better for cleaning the kitchen.
Install a brush on the front of the nozzle and then put on a waste towel or cloth (for stubborn stains and easily scratched materials).
It sprays steam while wiping the stain. The steam will emulsify the greasy dirt, and the dried greasy dirt will melt and soften, and then wipe it off with a wiper.
Stubborn stains that are difficult to remove can be sprayed onto the stains with detergent, and then cleaned with a steam cleaner after a while.
Cleaning of tiled floors and bathrooms
Dirt and soap dirt on the tile floor can be removed with a round brush
Apply cleaning agent directly on the stubborn dirt, and then use steam to clean it after a while.
Caveat
When using strong acid, strong alkaline, metal salt and other strong detergents, please do not use the steam cleaner. Splashing detergent is dangerous.
Air conditioning cleaning
When cleaning the air conditioner, please read the manual and precautions of the air conditioner carefully, be sure to turn off the main power of the air condi-
tioner and unplug the power plug of the air conditioner before cleaning.
After using the steam cleaner to clean, the company will not be responsible for the failure of the air conditioner. Before use, please consult the dealer or sales
store.
1. Put newspapers under the air conditioner.
Open the cover of the air conditioner and remove the filter. (For details, please read the operating instructions of the air conditioner carefully.)
Please use a vacuum cleaner to collect dust and other commonly used cleaning methods for the filter.
2. After removing the filter, the air-conditioning fan (like a mesh-like thing made of metal) will be exposed. A vacuum cleaner must be used carefully to remove
dust on the surface.
If the humid air conditioner fan is not easy to absorb, please wipe it gently with a towel. If the steam cleaner is used without removing the dust, agglomeration
will occur.
3. Use the tip of the nozzle to lightly blow steam against the fan blade.
Sewage flows out from the drain on the rear side of the air conditioner.
● Please do not use a round brush or use a nozzle to vigorously touch the fan blades. It may cause the air-conditioning fan blades to be twisted and deformed.
● Do not spray steam onto other electrical parts except the fan blades.
● There are also cases where some air conditioners cannot be used. Please check the operating instructions of the air conditioner or consult with the distribu-
tor of the air conditioner. (In the air conditioner's instruction manual, etc., it is stated that "please do not heat above 40°C." "please do not expose to water.")
4. Leave the air conditioner blades dry for half a day before using the air conditioner.
Cleaning of windowpanes and mirrors
A glass scraper is directly installed on the handle, and an extension tube can also be used to connect the handle and the glass scraper.
1. Press the steam switch, and then slowly approach the glass surface and wipe gently after the steam is sprayed.
2. The rubber strip of the glass scraper sticks to the surface of the glass and moves from top to bottom.
3. Wipe off the water droplets remaining on the glass and the water droplets flowing on the window frame.
Use on various cloth products
The surface where the ironing brush cover is installed will form a high temperature of 90˜950C, and the temperature of removing the nozzle cover of the ironing
brush cover will be higher. In this way, mites and sterilization can be eliminated. Under normal circumstances, cloth sofas, cushions, and curtains that are not
suitable for washing can be easily de-mite and sterilized.
1. Install the ironing brush and put on the cloth cover.
2. After spraying the steam, aim the steam at the place to be cleaned.
3. Because the surface touched by the steam will be wet, wipe it dry with a towel.
4. Remove the slight wrinkles of the suit, please hang the clothes on a hanger before using it.
Removing wrinkles from carpets and clothes
In addition: due to different types of carpets and cloths, different ways of forming wrinkles, and different time of placement, there is a possibility that wrinkles
cannot be completely removed. Please understand.
Removing wrinkles from the carpet
1. Hold the handle of the main body with one hand, and a towel that removes stains and absorbs excess water in the other hand.
2. Use the front end of the long tube nozzle to spray steam against the folds of the carpet.
Block the blown stains with a towel, and blow the stains onto the towel
2. Use a dry and clean towel to absorb moisture and wipe off dirt
Remove the wrinkles of cloth
1. Prepare a wet towel to remove dust
Put a towel on the other side of the dusty and wrinkled cloth and spray steam on the wrinkled surface of the cloth
2. Apply soap or detergent on the wrinkles and stains, spray steam at the front of the nozzle against the wrinkles, and use a towel to catch the stains and excess
water on the opposite side, which can also achieve the effect of decontamination and crease removal.
