EN
WWW.BORMANNTOOLS.COM
5
Adding water
Use a container to pour clean water into the water tank of the body, or remove the water tank separately, fill the water source with water and then put it
back into the body. Up to 0.8liters of water can be filled in the water tank.
Note:
1. The pressure relief valve is only used to discharge water after use, not as a water filling port
2. Except for clean water, other liquids (such as detergents, etc.) are not allowed to be poured into the water tank
3. When adding water, try to avoid overflowing or dripping onto the body.
Using the accessories
Caveat
Please install the accessory nozzle carefully before turning on the electric heating or closing the safety lock to avoid accidental steam injection.
The accessories are assembled and used according to the location and items according to the following methods
Using the round brush/nozzle
Round brushes are generally used in the kitchen, around microwave ovens, stoves, etc.
- In the case of serious stains, please directly apply cleaning agent to the stained surface.
- Please do not use it on the cleaned items that are easily damaged.
Using the ironing brush
Put the ironing brush cloth cover on the ironing brush as shown in the figure.
It can de-scale, sterilize, and disinfect clothes, curtains, sofas, etc., and can also de-wrinkle clothes.
- The ironing brush can also be connected with the extension tube
Note
- Please do not use it on synthetic fibre, nylon, hemp or dark coloured cloth products.
Using the glass scraper
Assemble the glass scraper as shown in the figure.
- It can also be used in combination with an extension tube
Note
Do not use it when the air temperature is below 0°C or on frozen windows. The glass may burst and cause injury.
Using the floor brushes
Please use it on heat-resistant ground.
Please do not use it on waxed floors or wooden furniture. The wax will volatilize and some of the paint on the floor will melt.
Floor brush connection method
1. Press and hold the button of the extension tube, and insert the floor brush and extension tube in the direction shown in the figure.
2. There are dial buttons on the front. Push the brush to the right to extend; push the brush to the left to retract.
3. You can use the attached towel on the floor brush, just clamp it with the clip on the brush head.
Note
It is not possible to just use the extension tube, it should be used after installing the extension tube nozzle
The main points and use cases of cleaning
The steam cleaner uses the heat of steam to easily remove stains. Here is an introduction to the main points and methods of cleaning.
Here is how to use the correct cleaning points.
Please do not use this machine to clean the following materials
- Leather
- Wallpaper (the glue will melt. There are also phenomena such as water absorption and blistering.)
- Composite items such as wood products, waxed furniture and beds will break and paint
- Synthetic fibre, silk, hemp or dark coloured cloth products
- The glass may crack when used at low temperature (try not to use steam for cleaning in winter)
- Plastic products may be deformed, discoloured, etc.
- Other items with poor heat resistance and items without heat-resistant measures on the surface
During use and after use, please do not put the nozzles and brushes on items that are poor in heat resistance or water
Points to remove stains
● Keep the nozzle as close to the stain as possible.
● Suitable for most stains and oil stains.
● Wipe off the stains with a cloth after they float up.
● Use a stiff brush to remove severe dry stains...
● It is more difficult to remove stains. Applying detergent directly on the stains will have a better effect after waiting for a while.
Caveat
When using strong acid, strong alkaline and other strong detergents, please do not use the steam cleaner. Splashing detergent is dangerous.
