EN
WWW.BORMANNTOOLS.COM
10
7. Turn the lever clockwise until the sprocket cover is secured then re-
turn it to the original position
1. Lever
Adjusting saw chain tension
Carry out the procedure of installing or removing saw chain in a clean place
free from sawdust and the like. Do not tighten the saw chain too much. Excessively high
tension of saw chain may cause breakage of saw chain, wear of the guide bar and break
-
age of the adjusting dial. A chain which is too loose can jump off the bar and it may cause
an injury accident.
The saw chain may become loose after many hours of use. From
time to time check the saw chain tension before use.
1.
Pull the lever up while pressing its edge. Turn it counterclock
-
wise a little bit to loosen sprocket cover lightly.
2.
Turn the tension knob clockwise to tighten the saw chain until the lower side of the
saw chain fits in the guide bar rail as illustrated.
3.
Keep holding the guide bar lightly and turn the lever clockwise
until the sprocket cover is secured.
4.
Return the lever to the original position.
Make sure that the saw chain does not loosen at the lower side and the
saw chain fits snugly against the lower side of the bar.
Summary of Contents for 036432
