BorMann 032793 Manual Download Page 6

EN

WWW.BORMANNTOOLS.COM

5

Troubleshooting

Problem

Possible Cause

Remedy

Unit does not start

Battery not installed properly

The battery is not charged

Check battery installation

Check battery charging requirements

The battery will not charge

The battery is not inserted to the charger

 Connect the battery to the charger 

The charger is not connected to the socket 

Connect the charger into a working outlet. 

Check current at receptacle by plugging in a lamp or other 

appliance

Check whether receptacle is connected to a light switch which 

turns power off when you turn out the lights

The air temperature is too high or too low

Attempt to charge the battery in a room where the surrounding  

air temperature is above 4,5 oC or below + 40,5 oC

Important: Please note, all repairs/service should be carried out by a qualified person.

Care must be taken when handling this product. 

Dropping this power tool could have an effect on its accuracy and could also result in personal injury. This product is not a toy and must be respected.

Environmental conditions can have a detrimental effect on this product if neglected.

Exposure to damp air can gradually corrode components.

If the product is unprotected from dust and debris, components will become clogged.

If not cleaned and maintained correctly or regularly the machine will not perform at its best. 

Handling and Storage

At the end of the machine's working life or when it can no longer be repaired, ensure that it is disposed of according to national regulations. 

— Contact your local authority for details of collection schemes in your area.

In all circumstances: 

• DO not dispose Of power tools with domestic waste. 

• DO not incinerate. 

• Do not dispose of as unsorted municipal waste. 

Warning! 

• Do not put battery pack in fire or mutilate; cells may burst or release toxic materials. 

• Do not short circuit cells, may cause burns. 

• The battery pack must be removed from the appliance before it is scrapped. 

• The battery pack is to be disposed of safely. 

• Do not mutilate batteries; corrosive electrolyte will be released. 

• Do not dispose of batteries or cells in a charged condition. 

Expired batteries must be recycled/disposed of in accordance with the appropriate regulation or legislation. They should be returned to your local warranty 

agent/stockist. 

Disposal 

Summary of Contents for 032793












Reviews: