EN
WWW.BORMANNTOOLS.COM
7
17. Speed controller operation (Picture 17)
1. The speed controller is placed above the switch.
2. Speed controller turn left, the suction turn down. Speed controller turn right, the suction turn up.
18. Synchronous working with electric tool (Picture 18)
1. Connect the vacuum cleaner hose with dust absorption outlet of electric tool.
2. Put the power plug of the electric tool into the synchronization socket of the vacuum cleaner.
3. Switch turns to ''-'' to stand by. Open the electric tool and then vacuum cleaner will start to work.
19. Synchronous working with air tool (Picture 19)
1. Connect the vacuum cleaner's hose with the dust absorption outlet of air tool.
2. Put the power plug of air tool into the gas seat valve of vacuum cleaner, and the other side of gas seat valve connects with air compressor.
3. Switch turns to ''-'' to stand by. Open the electric tool and then vacuum cleaner will start to work.
Accessory instructions
Floor brush
Use for clean carpet, wood floor, marble floor, tile floor and so on.
Big nozzle
Use for clean corner of wall, winder and so on.
Big round brush
Use for cleaning the edges of sofa, furniture frame,etc.
Maintenance
● In order to lengthen the life time, single using time is better not more than 20 minutes.
● In order to lengthen the life time, clean the body, filter and dust bag after use.
● Twine the power cord well, put accessories in slot.
● Clean the dirty water after using to prevent the rusting or corrosion of barrel.
● Clean the surface of vacuum cleaner with a dry cloth to prevent water getting into the vacuum cleaner and an electric short circuit even vacuum cleaner
burning.
Dust cleaning (Pictures 22 -23)
1. Take off rear cover with dust bag form vacuum cleaner barrel.
2. Take down the slip board below the dust bag, clean the dust.
3. Fit on the slip board to dust bag, fix dust bag onto rear cover and put them back to barrel.
Emptying the dirty water from the barrel (Picture 24)
1. Move vacuum cleaner near to sewers, take off the vacuum cleaner head.
2. Incline vacuum cleaner barrel, clean the dirty water.
3. Clean the dirty body with clean water, put the head back to barrel.
