BorMann 030386, Manual, Page: 6 / 15

EN
WWW.BORMANNTOOLS.COM
6
Weekly date and time settings
Stage
times of press
“SETTING”
The heater Condition Display Press “+” Press “-”
Time
calibration
setting
First
Adjust the date to
the current date
The date light flicker Date forward Date backward
Second
Adjust the time to
the current time
The time light flicker
every pressing
increase one hour and
repeat this cycle
every pressing increase
one minute and repeat
this cycle
Weekly tim-
ing setting
Third Set start date The date light flicker Date forward Date backward
Fourth Set start time
The time light flick-
er, “ON”light up
every pressing
increase one hour and
repeat this cycle
every pressing increase
one minute and repeat
this cycle
Fifth Set stopped time
The time light flick-
er, “OFF”light up
every pressing
increase one hour and
repeat this cycle
every pressing increase
one minute and repeat
this cycle
If user need timing in other day, user can completely re-operates “third”(can press “+”and“-”to set date),
“fourth”, “Fifth”.
Complete
setting
Hold this press
for 2 seconds
1.The heater exit weekly timing setting condition, and timer starts.
2.Display show the current time, and clock “ ”light up.
When the heater enter power saving mode, the power saving indication light up, and the heater will be working with full power (four tubes all light up).
When user is setting weekly timing (when heater is in setting condition), the heater is working with full power (four tubes all light up), when user finishes setting
and exit setting condition, the heater will be working with half power (only two tubes light up). Before reaches the appointment starting time, the heater works
with half power (only two tubes light up). Until the heater reaches the appointment starting time, four tubes will be all light up, the heater will be working with
full power. When the heater reaches the appointment finishing time, two tubes on heater will go out and other two tubes will keep light up. Until enter the next
stage setting time, the other two tubes will resume light up. If no other setting time later, all tubes will go off, the heater is power off.
Note: When the heater is working in weekly setting time, if heater meets open window function, two tubes on heater will go out and other two tubes will keep
light up. Then user can press any button to make heater resume works in weekly setting time condition.
EN
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of
the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses
or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.