BorMann 022954, Owner'S Manual, Page: 5 / 41

5
www.BormannTools.com
2. Position the extension and the table leg relative to the router table top as shown in Figure 1. Note that the legs are
positioned to the inside oi the table top sides. Secure the table leg and extension using two (2) long truss head machine
screws and two (2) hex "KEPS" nuts.
3 Position the switch box against the leg as shown in Figure 1 and 2. Secure the switch box to the leg and the router table top
using two (2) long truss head machine screws and two (2) hex "KEPS" nuts.
Note: There are two hex shaped recesses in the switch box assembly case, into which the hex "KEPS" nuts recess. They
should be inserted nut side into recess with the washer side facing outward.
FIGURE 1
FIGURE 2, ASSEMBLY DETAIL
4. Assemble the remaining legs and the remaining extension to the table top using four (4) long truss head machine screws,
and four (4) hex "KEPS” nuts for each leg Refer to Figure 3 and 4. DO NOT TIGHTEN fasteners at this time.