16
www.BormannTools.com
Install the knife blade
1. Place the knife blade against the blade locking plate, in the c
orrect position relative to the pins.
2. Insert the knife blade and knife locking plate together in t
he slot and lock in position by turning the outer hexagon
blot (A) anticlockwise. Ensure th
at the blades face in the right d
irection (see picture).
3. Set the height of the knife shaft of the knife blades as
1mm with the bit gauge,
That two
support blocks on left and
right side of bit gauge are pressed against the knife
blade.(Loosen, if necessary, the clamping screws to move th
e blade
to the correct
position. ) When the knife blade is positioned correctly. Hold it
firmly in place and tighten all outer
hexagon bolt (A).
