BorMann 022145, Operation Manual

Page: 15 / 16

Figure 8
Storage and Maintenance of the Machine
After each use, erect the tool with the head down, so that the liquid inside the drum can flow out. Manually rotate
the drum to the waterproof plug to reveal the shell, and remove the waterproof plug with an Allen wrench. Insert
the waterproof plug in the sleeve hole opening at the end of the tool or keep it properly for next time (Fig. 9).
Please clean the flexible shaft and drum carefully. If it is not to be used for a long time, please apply butter on the
surface of the flexible shaft to prevent rust.
Figure 9
Technical Data
Voltage/frequency: 230V/50HZ
Input power: 240W
Operating speed: 550RPM
Soft cable diam: 3/8""
Drum material: PLASTIC
Soft cable length: 7.5M
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless
these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual
that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included
in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided
if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including
maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.