BorMann 022145, Operation Manual

Page: 13 / 16

Operating Instructions:
Control
Notice: Before using the machine, you must be familiar with the functions and be proficient in operating it.
Annular jaw
Rotate the locking ring counterclockwise to make the jaw grasp the flexible shaft and produce a large thrust, so as
to facilitate the removal of blocked garbage and prevent the flexible shaft from retracting into the drum; rotate the
locking ring clockwise to relax the flexible shaft for easy advance and retract of the flexible shaft.
Notice: When the flexible shaft out of the tool is less than 200mm or more than 6000mm, it is forbidden to set
the locking ring in the locked state. Otherwise, it will cause the flexible shaft and jaw to be damaged. Be careful
while using it (Fig. 2)
Figure 2
Switch variable speed
Control the speed between 0~560RPM, exert pressure on the switch: the greater the pressure, the higher the speed.
Switch forward and reverse rotation
This switch can control the steering of the flexible shaft: press the L for forward rotation and press the R for
reverse rotation. Notice: The reverse rotation is only used to retract the flexible shaft in the trapped state (Fig. 3).
Figure 3
Flexible shaft auto scaling
1. Press the forward and reverse rotation button L: 1) Press the speed switch lightly, move the handle forward to
the F position, and the flexible shaft will be delivered forward (Fig. 4);
Figure 4
2) Press the speed switch lightly, pull the handle back to the R position, and the flexible shaft will retract backwards
(Fig. 5).
Figure 5
2. When the forward and reverse rotation button R is pressed, the flexible shaft stretches in the opposite
direction.