BorMann 018933, Owner'S Manual, Page: 7 / 15

3
www.BormannTools.com
Safety instructions
• Before switching on the appliance for the first time please check if the technical specifications indicated on the unit
correspond to the mains parameters.
• For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in
this instruction manual.
• Do not use outdoors.
• Do not disassemble the appliance when it is plugged to the power supply. Always unplug the appliance from the power
supply before cleaning and when not in use.
• To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened,
unplug it immediately and check in service center.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge; unless they have been given supervision or instruction concerning use of the
appliances by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not leave the appliance switched on when not in use.
• Do not use other attachments than those supplied.
• Do not attempt to repair adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the
nearest service center only.
• Keep the cord away from sharp edges and hot surfaces.
• Do not pull, twist, or wrap the power cord around the appliance.
• Do not place the appliance near gas or electric oven or store at heated surface.
• Avoid contacting with moving parts.
• The blades are very sharp, so handle them with care.
• Do not push products into the appliance with fingers while it is in operation. If food becomes lodged in the feeder tube use
the pusher to push it down. If this doesn't work, turn the motor off, unplug the unit, and then disassemble the appliance to
remove remaining food.
• When carrying the unit be sure to hold the motor housing with both hands. Do not carry the unit by the hopper plate or
head.
• Do not fix the cutting blade and cutting plate when using Kibbe attachment.
• Do not grind hard food such as bones, nuts, ginger or other products with hard fiber.
• When the circuit breaker activates, do not switch on.
• Do not run the meat grinder continuously for longer than 7 minutes. Turn the unit off and let it rest for at least 7 minutes to
cool down the motor, otherwise the motor may be damaged.
• Be sure to turn the appliance off after each use. Make sure the motor stops completely before disassembling.
• Do not overload the appliance with products.
If the product has been exposed to temperatures below 0 0 C for some time it should be kept at room temperature for at least
2 hours before turning it on.
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such
changes influence significantly the product safety performance, and functions.
• Production date mentioned on the unit and/or on the packing materials and documentations.
Before the first use
• Wash all parts (except body) in warm soapy water.
• Before plugging in, ensure the appliance is switched off.
Instructions for use
Assembling (Fig.1-6)
• Place the head tightly onto the head inlet.
• Place the snake into the head, long end first, and turn to feed the screw slightly until it is set into the motor housing.
• Place the cutting blade onto the snake shaft with the blade facing the front as illustrated. Place the desired cutting plate
next to the cutting blade, fitting protrusions in the slots. If it is not fitted property! Meat will not be ground.
• For easy disassembly on the fix ring are provided few grooves, you can use any improvised cutlery to reverse it.
• Screw the fixing ring tightly. Do not overtighten.
• Place the feed tray on the head and fix it into position.
• Locate the unit on a firm surface.
• The air passage at the bottom and the side of the motor housing should be kept free and not blocked.