BorMann 010821, User Manual, Page: 6 / 46

EN
WWW.BORMANNTOOLS.COM
6
Avoid Electrical Shock
Check that the electric circuit is adequately protected and that it corresponds with the power, voltage and frequency of the
motor.
Do not plug or unplug the motor while standing in or around damp or wet ground. Do not use the mixer in wet or damp areas
or expose it to rain.
Prevent body contact with grounded surfaces: pipes, radiators, ranges, and refrigerator enclosures.
Make sure your fingers do not touch the plug’s metal prongs when plugging or unplugging the mixer.
Keep Visitors And Children Away
Keep unauthorized persons away from the mixer.
Do not allow children to handle or climb on or in the mixer.
Do Not Overreach
Keep proper footing and balance at all times when loading or unloading the mixer.
Never stand on mixer. Serious injury could occur if the mixer is tipped or if the moving parts are unintentionally contacted. Do
not store anything above or near the mixer where anyone might stand on the mixer to reach them.
Avoid Injury From Unexpected Accident
Keep hands out of the way of all moving parts. Do not place any part of your body or any tool, like shovel in the drum during
operation. When operating, do not pass hands through the clearance between frame and support arm or the one between
the drum and support arm.
Do Not Force Tool
It will do a better and safer job at its design rate. Always work within the rated capacity.
Do not start the motor if the drum is fully loaded. Do not turn mixer off while full of concrete. Do not use the mixer for a
purpose for which it was not intended.
The mixer is not to be towed by any vehicle.
Never Leave the Mixer Running Unattended
Do not leave mixer until it has come to a complete stop.
Disconnect Power
Never open the motor cover before unplugging the mixer. Disconnect from power supply when not in use, before moving,
making adjustments, changing parts, cleaning, or working on the mixer. Consult technical manual before servicing.
Maintain Your Mixer With Care
Clean the mixer immediately after use. Keep the mixer clean for best and safest performance. When maintaining this mixer,
only the manufacturers original replacement parts may be used.
Protect The Environment
Take left over materials to an authorized collection point or follow the stipulations in the country where the mixer is used. Do
not discharge into drains, soil or water.
Store Idle Equipment
When not in use, the mixer should be stored in a dry location to inhibit rust. Keep the mixer away from children and others
not qualified to use it.
Electrical Connection
This mixer is double insulated to Class II protection and IP44 rated. The insulation will only remain effective if the original insu-
lating parts are used for repairs and the spaces between the original insulation are maintained.