BORK J700, Operating Manual

Page: 7 / 10

10 11
CLEANING OPERATION
Before cleaning always unplug the appliance.
Never immerse the coffee grinder, the power
cord or the plug of the power cord into water or
any other liquid. Do not allow formation of water
condensate thereon and do not use the coffee
grinder in places with increased humidity.
• Take off the transparent lid by slightly turning it
counterclockwise.
• Take off the removable container by slightly
turning it counterclockwise.
• Wash the container and the lid in soapy water,
then rinse and dry carefully.
• Wipe the surface of the coffee grinder with a wet
napkin soaked in soapy solution, then wipe it
with a soft dry napkin or use a special agent for
cleaning of plastic surfaces.
Do not use wire wools, chemical agents or abrasive
cleaning agents to clean the external surface of the
coffee grinder.
• Place the cord in the casing of the coffee grinder
by turning clockwise the lever located on the
bottom of the coffee grinder.
Store the coffee grinder in the vertical position on
an even dry surface.
• Press the START button, and the coffee grinder
will start operation. The coffee grinder will
automatically stop when grinding will be
completed.
Press the START button to stop grinding at any
time. If you press the button again the coffee
grinder will start grinding from the beginning.
• After grinding unplug the appliance.
• Take off the transparent lid by slightly turning
it counterclockwise.
• Take off the removable container by slightly
turning it counterclockwise. Ground coffee
is ready for use.