background image

15

Instruction manual 

Eng

GENERAL SAFETY 

INSTRUCTIONS

>

 

Use this heater only as described in this manual. Any other use 
not recommended by the manufacturer may cause fire, electrical 
shock, or injury to persons.

 

Make  certain  that  the  power  source  conforms  to  the  electrical 
requirements of heater. (AC220-240V/50Hz)

 

Extreme caution is necessary when any heater is used by or near 
children  or  invalids  and  whenever  the  heater  is  left  operating 
unattended.

 

To reduce the risk of electric shock, this plug is intended to fit in a 
correct outlet. If the plug of heater does not fit fully in the outlet, 
contact a qualified electrician. Do not attempt to defeat this safety 
feature.

 

Where  possible,  avoid  using  of  extension  cords  because  the 
extension cord may overheat and cause a risk of fire. Never use a 
single extension cord to operate more than one heater.

 

Do not operate heater with a damaged cord or plug or after the 
heater malfunctions, has been dropped or damaged in any manner. 
Return  heater  to  authorized  service  facility  for  examination, 
electrical or mechanical adjustment or repair.

 

If  the  supply  cord  is  damaged,  it  must  be  replaced  by  the 
manufacturer or its service agent or a similarly qualified person 
in order to avoid a hazard.

 

Turn off the power switch and unplug power cord before servicing 
or moving the heater. Always unplug heater when not in use.

Summary of Contents for CH BRE 2018 SI

























Reviews: