BORK CH BRE 1818 SI, Instruction Manual

Page: 28 / 32

Oscillating ceramic heater with thermostat CH BRE 1818 SI
28
5. Turn the heater on by pressing the Power & Thermostat knob.
6. The LED displayer on the display panel will display the current
room temperature.
7. Upon turning the heater on, the unit will be in the HIGH heat mode
(1800 watts) and the HIGH indicator will be light.
8. Pressing the Mode & set time button at this point will set the heater
into the LOW heat mode (1100 watts).
9. Pressing the Mode & set time button once more will set the heater
into the AUTO mode. Notice that the display now displays a set
temperature indicator.(see THERMOSTAT INSTRUCTION)
10. To turn the heater off, press the Power & Thermostat knob and
turn off power switch, then remove plug from power outlet..
Oscillation Function
This function will work in any mode. Pressing the oscillation button
(OSC.) will allow the heater to oscillate back and forth. To stop the
oscillation, press the oscillation button once more.
Timer Function
This function will work in any mode. The timer function allows you to
set the length of operation from 0.5 hour to 7.5 hours.
Keep to press the Mode & set time button for above two seconds,
“0.5” indicator flickering indicates to enter the Timer Function.
Rotating the Power & Thermostat knob clockwise will increase the