BORK CH BRE 1818 SI, Instruction Manual

Page: 20 / 32

Oscillating ceramic heater with thermostat CH BRE 1818 SI
20
WARNING: DO NOT DEPEND ON THE POWER BUTTON OR SWITCH AS
THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING OR
MOVING THE HEATER. ALWAYS UNPLUG THE POWER CORD.
 To disconnect heater, turn switch to off position, then remove plug
from outlet. Pull only by the plug. Do not pull on the cord when
disconnect heater.
 Do not insert or allow fingers or foreign objects to enter any
ventilation or exhaust opening as it may cause an electric shock or
fire or damage the heater. Do not block or tamper with the heater
in and manner while it is in operation.
 To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not place heater on soft surfaces, like a bed, where
openings may become blocked.
 Always place the heater on a stable, flat, level surface when
operating, to avoid the chance of the heater overturning. Locate
the power cord so the heater or other objects are not resting on it,
Do not run power cord under carpeting. Do not cover power cord
with throw rugs, runners, or the like. Arrange power cord away from
room traffic and where it will not be tripped over.
 This heater is hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Always use handle when moving this heater.
Keep combustible materials, such as furniture, pillows, bedding,
papers, clothes and curtains at least 0.9m from the front of the
heater and keep them at least 0.3m from the sides and rear.
 A heater has hot and arcing or sparking parts inside. It must not
be used in potentially dangerous locations such as flammable,
explosive, chemical-laden or wet atmosphere.