BL2005ECP & BL2605ECP
Series Handing Instructions
Helpline: +44 (0) 1708 225700
www.borglocks.com
If the unit is to be fitted to a right hand hung door (hinged on the right) the unit is ready to be fitted. If the handing needs to be
changed to suit a left hand hung door (hinged on the left) the following instructions will need to be followed.
Changing Keypad Handing
1.
Turn the keypad over and remove the 2 screws either side of the spindle follower as per
Fig.1
.
2.
Lift the cover plate off to expose the handing pin underneath as per
Fig.2
.
3.
Remove the handing pin located in ‘
R
’ hole and rotate the handing disc clockwise so that the ‘
L
’ is on the bottom as per
Fig.3
.
4.
Place the handing pin in the ‘
L
’ hole and refit the cover plate with the 2 screws. When refitting the cover plate, ensure that it is
facing as per
Fig.4
and screws down flush.
5
. Test the keypad to ensure that the knob is free rotating clockwise and solid when turning anti-clockwise.
→
C
*
X
Y
Fig.1
→
C
*
X
Y
L
R
Fig.2
→
C
*
X
Y
L
R
Fig.3
Fig.4
Changing Rim Deadbolt Handing
1.
Turn the rim deadbolt over and remove the 4 screws as per
Fig.5
.
2.
Lift the cover plate off to expose the deadbolt underneath.
3.
Horizontally flip the deadbolt over to as per
Fig.6
.
4.
With the deadbolt in position, refit the cover plate with the 4 screws.
5
. Test the deadbolt to ensure that the knob throws and withdraws the deadbolt.
Fig.5
Fig.6
