Borg & Overström
GB
17
Install & Operation Manual
CO2 Bottle Installation - Sparkling Versions Only
Allow the machine to stand for 8 - 12
minutes for the initial chilling process to
complete.
Unpack CO2 Regulator and fit elbow fitting
to spigot outlet.
Attach the regulator to the disposable CO2
bottle, ensuring the small pressure relief
vent in the stem is facing away from you or
anyone else. Ensure the regulator is closed.
Hand tighten securely.
Stand the cylinder in a suitable place.
It is necessary to prime the sparkling system
with CO2 - using the sparkling dispense
lever for a few seconds until CO2 is coming
through, check and adjust the C02 pressure
accordingly
Connect the assembled CO2 bottle and
regulator to the CO2 inlet using a ¼” pipe.
We recommend between 3.5 - 4 bar(58
PSI) (max). Do not exceed 4 bar pressure.
58 PSI
2
4
5
6
7
1
3
10
mins
