24
Gas maintenance
Replacement of the injectors of the burners
Select the injectors to be replaced according to the “Table for the choice
of the injectors”. The nozzle diameters, expressed in hundredths of a
millimetre, are marked on the body of each injector.
If the injectors are not supplied they can be obtained from the “Service
Centre”.
Replacement of the injectors of the cooktop burners
To replace the injectors proceed as follows:
*
Remove pan supports and burners from the cooktop.
*
Using a wrench, substitute the nozzle injectors “
J
” (figs. 2.10, 2.11) with
those most suitable for the kind of gas for which it is to be used.
The burners are conceived in such a way so as not to require the
regulation of the primary air.
J
Fig. 2.10
Fig. 2.11
Auxiliary,
Semi-rapid and
Rapid burners
Triple ring burners
J
Fig. 2.12
F1
EN
Bor
etti Milano / User guide - Installation advice