background image

2

Dear customer,

Thank you for having purchased and given your preference to our product. 
The safety precautions and recommendations reported below are for your 
own safety and that of others. They will also provide a means by which to 
make full use of the features offered by your appliance. Please preserve 
this booklet carefully. It may be useful in future, either to yourself or to 
others in the event that doubts should arise relating to its operation.

This appliance must be used only for the task it has explicitly been 
designed for, that is for cooking foodstuffs. Any other form of usage 
is to be considered as inappropriate and therefore dangerous. The 
manufacturer declines all responsibility in the event of damage caused 
by improper, incorrect or illogical use of the appliance.

DECLARATION OF CE CONFORMITY

This appliance has been designed to be used only for cooking. Any other 
use (such as heating a room) is improper and dangerous.
This appliance has been designed, constructed, and marketed in 
compliance with:

 

*

Safety requirements of the “Gas” Regulation (EU) 2016/426;

 

*

Safety requirements of the “Low voltage” Directive 2014/35/EU;

 

*

Safety requirements of the “EMC” Directive 2014/30/EU;

 

*

Requirements of EU Directive 93/68/EEC;

 

*

Requirements of EU Directive 2011/65/EU. 

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE 
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EC.

At the end of its working life, the product must not be disposed of as 
urban waste. It must be taken to a special local 
authority differentiated waste collection centre or to 
a dealer providing this service.
Disposing of a household appliance separately 
avoids possible negative consequences for the 
environment and health deriving from inappropriate 
disposal and enables the constituent materials to 
be recovered to obtain significant savings in energy 
and resources. As a reminder of the need to dispose 
of household appliances separately, the product is 
marked with a crossed-out wheeled dustbin.

GB

EN

Bor

etti Milano / User guide - Installation advice

Summary of Contents for ML9016GSAN




































































Reviews: