BORETTI IBRIDO TOP, User Manual

Page: 19 / 192

19
EN
Bor
etti Ibrido
Top / User guide - Installation advice
5.4 Stainless steel
After the first use, parts of the barbecue may become discoloured by the intense
heat of the burners. This is normal.
Purchase a cleaning product for stainless steel and use this when brushing Use
a stainless steel cleaning agent and rub it in the same direction as the brushing
of the metal. It is possible that grease splatters and sticks on the stainless
steel parts, making some parts look worn. Use a non-abrasive cleaning agent in
combination with a stainless steel cleaning agent to remove the grease.
5.5 Changing the battery of the igniter (if present)
Turn and remove the igniter button and remove the AA battery. Insert a new AA
battery.
5.6 Enamel parts
Some parts of the barbecue have an enamel coating. Enamel is a glass-based
product and is very durable and wear-free. However, it is not very resistant to
shocks and impact, which may cause fine cracks. These fine cracks can lead to
small pieces of enamel breaking off, resulting in rust spots. However, chips and fine
cracks in the enamel will not affect the performance of your barbecue. No claim
can be made on the warranty for enamel damage in the cooking area after use.
5.7 Ventilation
The burners can only work properly if the heat they produce can also escape. If
this is not possible, the burners may not get enough oxygen. This can cause an
after-ignition, especially if the burners are in the “HIGH” position. If this happens
repeatedly, cracks may occur in the burners. For this reason, there are ventilation
openings around the barbecue.
These allow hot air to escape. Always make sure that there is sufficient open space
around the cooking surface (the grills provide sufficient space). Never cover the
ventilation openings with foil or other materials that obstruct the air flow. Ensure
that the cooking surface is NEVER covered completely, for example by a large pan
or with only grill flat tops.
5.8 Replacing the gas hose
The gas hose must be replaced every two years. Rubber gas hoses can dry out
which may result in gas leakage.