![background image](http://html1.mh-extra.com/html/boretti/bvw-652/bvw-652_operating-instruction_2788327120.webp)
Fill the rinse aid compartment with rinse aid until the rinse aid level indicator becomes
dark;
2
refit the cap and close it by turning it in a way that the nails will correspond to one
another. By checking the rinse aid level indicator on the detergent dispenser, you can
understand whether or not your machine needs rinse aid. A dark indicator
b
means that
there is rinse aid in the compartment, while a light indicator
a
shows that you need to fill
the compartment with rinse aid.
The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for
rinse aid is the position 4. You need to increase the degree of the adjuster if water stains
form on your dishes after a wash, whereas you need to decrease the degree if a blue
stain is left when wiped by hand.
3
Warning: Use only those rinse aid materials which are allowed for use in the machine.
As rinse aid residues left as a result of overflowing will create extremely high amounts of
foam and thus reduce the washing performance, remove the excess amount of rinse aid
by wiping it with a rag.
If you properly place your dishes into the machine, you will be using it in the best way in
terms of energy consumption, washing and drying performance.
There are two separate baskets for you to load your dishes into your machine. You can
load into the lower basket such round and deep items as pots with long handles, pot lids,
plates, salad plates, cutlery sets.
The upper basket has been designed for tea plates, dessert plates, salad bowls, cups
and glasses. When placing long-stem glasses and goblets, lean them against the basket
edge, rack or glass supporter wire and not against other items. Do not lean long glasses
against one another or they cannot remain steady and may receive damage.
It is more appropriate to locate the thin narrow parts into the middle sections of baskets.
You can place spoons among the other cutlery sets in order to prevent them from sticking
to one another. You are recommended to use the cutlery grid in order to obtain the best
result.
To avoid any possible injuries, always place such long-handle and sharp-pointed dishes
as serving fork, bread knife etc. with their sharp points facing down or horizontally on the
baskets.
Warning: Place your dishes into your machine in a way that they will not prevent the
upper and lower spray arms from spinning.
Top basket
Height Adjustable Rack
These racks are designed to increase the capacity
of the top basket. You can place your glasses and
cups on the racks. You can adjust the height of
these racks. Thanks to this feature, you can place
different sizes of glasses under these racks.
Thanks to height adjustment plastics mounted on
the basket, you can use your racks in 3 different
heights. In addition, you can place long forks, knives
and spoons on these racks laterally, so that they do
not block the revolution of propeller.
Top basket height adjustment while it is full
Basket height adjustment mechanism on the top
basket of your
machine is designed to let you adjust the height of your
top basket upwards or downwards, without removing it
LOADING YOUR DISHWASHER
15
Summary of Contents for BVW-652
