34
PR266
Ha
Hb
Hc
Hd
Apply covers (C-D) on joint cover lugs and into hinge
holes.
Snap vent grille (B) and hinge covers (E) into
position.
Separate parts Ha, Hb, Hc, Hd as shown in the
figure
D724
Fasten the appliance with 4 screws provided in the
kit included with the appliance
Press in the joint covers between the appliance and
the kitchen unit.
I
I
B
E
E
D
C
From the plastic cover (E), which is used to cover
the hinge with the pivot pin, you must take away the
part as indicated in the drawing.
This operation is made easer since there is, in the
internal part of the cover hinge lid a groove that
facilates the removal of this coomponent.
“Remove the part marked with DX, if the pivot pin is
inserted in the right hinge, SX in opposite case.”
