BORETTI BKVD-179, Operating Instructions Manual

Page: 82 / 92

EN - 78 -
Replacing the Refrigerator Light Bulb
1. Unplug the unit from the power supply,
2. Remove the refrigerator light cover (A) by pressing the
hooks placed on both sides of the cover.
3. Change the light bulb (B) with a new one (not more than
15 W).
4. Place the light cover in its place and plug the unit.
• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package, bands or strong cords and follow the
instructions for transportation on the package for re-transportation.
• Remove movable parts (shelves, accessories,
vegetable bins etc.) or fix them into the fridge
against shocks using bands during re-positioning
and transportation.
• Carry your fridge in the upright positio.
B
A
SHIPMENT AND REPOSITIONING PART - 5.
BEFORE CALLING YOUR AFTER SALES SERVICE PART - 6.
If your refrigerator is not working properly, it may be a minor problem, therefore check the
following.
The appliance does not operate,
Check if;
• There is a power failure,
• The mains plug is not properly plugged in, or is loose
• The thermostat setting is on position “ ”,
• The socket is defective. To check this, plug in another appliance that you know which is
working into the same socket.
The appliance performs poorly;
Check if;
• You have overloaded the appliance,
• The doors are not closed perfectly,
• There are not enough ventilation ducts on the kitchen unit as mentioned in the Installation
Manual.
If there is noise;
The cooling gas which circulates in the refrigerator circuit may make a slight noise (bubbling
sound) even when the compressor is not running. Do not worry, this is quite normal. If these
sounds are different check if;