0
• Start-up/ switch off a heating zone :
Action
Control panel
Display
Increase power
touch key [+]
[1] to [9]
Decrease power
touch key [-]
[9] to [1]
Stop
touch simultaneous [+] and [-]
[0] or [H]
If no action is taken within 20 seconds the hob will go back into stand by mode.
Pan detection
The pan detection ensures a perfect safety.
The induction doesn’t work :
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this case
it is impossible to increase the power and the display shows [U]. This symbol disappears when
a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows [U].
The symbol [U] disappears when the pan is put back to the heating zone. The cooking continues
with the power level setted before.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [H] on the display.
The symbol [H] disapears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them.
There are risks of burn and fire.
Booster function
The booster function [P] grants a boost of power to the selected heating zone. If this function
is activated the heating zones works during 10 minutes with an ultra high power. The booster is
foreseen for example to heat up rapidely big quantities of water, like nuddles cooking.
• Start up / Stop the booster function:
Action
Control panel
Display
Zone selection
press key [+]
[0]
Increase power
touch key [+]
[1] to [9]
Start up the booster
press key [P]
[P] during 10 mn
Stop the booster
press key [-]
[9]
press key [P]
[9]
The booster function [P] can also be started directely:
Action
Control panel
Display
Zone selection
press key [+]
[0]
Start up the booster
press key [P]
[P] during 10 mn
Stop the booster
press key [-]
[9]
press key [P]
[9]
