EN
35
Installation
www.bora.com
X
X
If necessary, lay the height adjustment plates [2]
underneath.
X
X
Place the height adjustment plates next to the sealing
tape [2].
6.7.4 Securing the cooktop
1
2
3
Fig. 6.36 Securing the cooktop
[1]
Cooktop
[2]
Installation clamp
[3]
Fixing bracket
X
X
Secure the cooktop to the worktop [1] with the fixing
bracket [3] on the installation clamp [2] .
Q
Q
Tightening torque: max. 2 Nm
6.7.5 Establishing a connection with the
back wall
1
3
2
Fig. 6.37 Connection with the back wall
[1]
Telescopic pull-out
[2]
Adhesive tape
[3]
Back wall of unit
X
X
Push the telescopic pull-out [1] until it is tight up
against the back wall of the unit [3].
Q
Q
With the telescopic pull-out the distance to the back
wall of the unit can be flexibly bridged.
X
X
Check that the telescopic pull-out [1] fits accurately, is
flush with the cut-out on the back wall of the unit [3]
and closes it off.
X
X
Secure the telescopic pull-out [1] to the back wall of
the unit [3] using the adhesive tape [2]
6.7.6 Inserting the activated charcoal filter
INFO
Removing the filter – see Cleaning chapter,
Changing the filter
2
1
Fig. 6.38 Remove the filter replacement cover
[1]
Filter replacement cover
[2]
Inlet opening
X
X
Inside the inlet opening [2] pull the filter replacement
cover [1] out through the opening in the filter housing.
OBEN / TOP
2
1
Fig. 6.39 Activated charcoal filter
[1]
Activated charcoal filter
[2]
Grip strap
X
X
Remove the packaging from the activated charcoal
filter [1].
X
X
Position the activated charcoal filter correctly with the
help of the printed symbols (arrow left, grip strap [2]
right).
X
X
Hold the activated charcoal filter at both ends.
X
X
Bend the activated charcoal filter into a cylindrical
shape so that both ends of the filter are opposite each
other.
Summary of Contents for Pure PURA
Page 59: ......
