EN
23
Operation
www.bora.com
Temperature
C30 +C32 low power l
evel configuration
C31 low power
level configuration
80° C
80
90° C
90
.
100° C
100
110° C
1 10
:
120° C
120
130° C
130
*
140° C
140
Tab. 6.3
Low power level temperatures
6.3.2 Power setting
Switching on the power setting
INFO
Both grill zones are equipped with a power-
enhancing power setting.
INFO
The power setting cannot be activated is the
bridging function is switched on.
If a grill zone is operated with power setting
P
, the other
cooking zone can only be operated at a maximum power
level of
5
.
If the power setting is increased from
5
, the power level is
switched down from
P
.
If the power level is set higher than
5
when power
setting
P
is activated for the other cooking zone, it is
automatically reduced to power level
5
after 3 seconds
(the control knob display flashes for 3 seconds).
If the power setting
P
is deactivated again within these
3 seconds, the second cooking zone can continue to be
operated at the higher power level.
X
X
Twist the knob ring to the 10 o’clock position.
Q
Q
The control knob display shows
P
and the power
setting is activated.
Q
Q
After 10 minutes, the cooking zone is automatically
switched back to power level
9
.
Switching the power setting off early
X
X
Turn the knob ring to the desired power level.
Q
Q
The power level set is active and is shown in the
control knob display.
6.3.3 Bridging function
INFO
If the bridging function is active, both cooking
zones will operate at the same time on the
same power level.
INFO
If the bridging function is activated, the
temperature is only displayed on the right hand
control knob.
Temperature
C30 power level
configuration
C31 +C32 power level
configuration
150° C
150
1
160° C
160
2
170° C
170
3
180° C
180
4
190° C
190
5
200° C
200
6
210° C
2 10
7
220° C
220
8
230° C
230
9
250° C
250
P
Tab. 6.2
Power level temperatures
Setting a low power level
INFO
There are additional power levels available in
the low temperature range (80 - 140°C).
INFO
The knob ring position for the low power levels
is between the 12 o’clock position and the 1
o’clock position.
15°
Fig. 6.3
Knob ring position for low power levels (and cleaning
function)
X
X
Twist the knob ring around 15° clockwise from the 12
o’clock position, where it should slot into place.
Q
Q
c
appears in the control knob display.
X
X
Press the touch surface for 1 second.
Q
Q
The first low temperature level is activated.
X
X
Press the touch surface again for 1 second to increase or
reduce the temperature.
Q
Q
Every time the touch surface is touched for 1 second,
the next power level up is activated.
Q
Q
If the highest of the low power levels has been
reached, the power level is reduced by one power level
every time the touch surface is touched for 1 second.
Summary of Contents for PKT11
Page 31: ......